iCarsoft BMM V3.0 4" TFT BMW Mini Rolls Royce OBDII Pro Diagnostic Scan Tool

ICARSOFT BMM V3.0 FEATURES FOR BMW, MINI AND ROLLS ROYCE

Read and clear trouble codes | On most of the electronic systems such as engine, transmission, ABS, airbag etc.
Support OBDII/EOBD | (Ten Modes of Operation)
Full ECU Diagnosis
Oil Light / Service Reset
Electronic Parking Brake (EPB) | System maintenance, deactivate and reactivate the EPB system for replacement and initialization
Battery Management System (BMS) | Register new battery to the BMS while battery replacement
Diesel Particulate Filter (DPF) | Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator
ABS Bleeding | Release the air to restore ABS brake sensitivity, or relearn while ABS replaced
Electronic Throttle Control system (ETC) | Relearn the throttle va value while clear or replace the throttle valve
Steering Angle Sensor (SAS) | Calibrate the steering wheel to straight ahead, or recalibrate SAS while steering part replacement.
Body Stability (BCM) | Function supports routine maintenance of DSC modules, for example reset or delete the adaptation values and start-up the unit.
Engine (ECM) | Function supports routine maintenance of engine modules, for example reset or delete the adaptation values and calculate fuel consumption.
Trans adaption (TCM) | Function supports routine maintenance of transmission modules, for example reset adaptation values and adjust the oil level.
TPMS | Function include displaying sensor IDs from the vehicle`s ECU, inputting TPMS sensor replacement lD and testing sensors.
Engine ldle correction | Can be executed when the idle speed fault is resolved. Adjust the engine speed of the car at idle speed.
Adaption function | Allows you to perform adaptive learning / reset / calibration and other functions for each control module. It includes some important module data for parameter adjustment such as Remote Control Adaptation
Injector coding | relearn the injector control parameter while the injector renewed or replaced
Actuation Test / Bidirectory Test | Used to access vehicle-specific subsystem and component tests
Special Functions | Such as Reset KAFAS (Camera) calibration, standardise driver's seat, front light electronic turn signal etc.

Applies to most of the BMW, Mini and Rolls Royce models which equipped with OBDII-16 DLC.
Certain functions may be limited from the vehicle manufacturer due to the requirement of a special factory access code.
The iCarsoft BMM V3.0 scanner covers over 20 years of models, some functions may not beavailable on all years / models.
 

Coverage for BMW Diagnostics for BMW Bleeding function BMW Battery Management System BMW Body Stabilitay BMW Diesel Particle Filter BMW Electronic Control BMW Electronic Parking Brake BMW Electroninc Throttle Control BMW Engine Idle BMW Injector BMW Oil Service BMW Steering Angle Sensor BMW Trans Adaption BMW Tyre Preasure Management BMW Other functions BMW

Coverage for MINI Diagnostics for MINI Bleeding function MINI Battery Management System MINI Body Stabilitay MINI Diesel Particle Filter MINI Electronic Control MINI Electronic Parking Brake MINI Electroninc Throttle Control MINI Engine Idle MINI Injector MINI Oil Service MINI Steering Angle Sensor MINI Trans Adaption MINI Tyre Preasure Management MINI Other functions MINI

Coverage for Rolls Royce Diagnostics for Rolls Royce Bleeding function Rolls Royce Battery Management System Rolls Royce Body Stabilitay Rolls Royce Diesel Particle Filter Rolls Royce Electronic Control Rolls Royce Electronic Parking Brake Rolls Royce Electroninc Throttle Control Rolls Royce Engine Idle Rolls Royce Injector Rolls Royce Oil Service Rolls Royce Steering Angle Sensor Rolls Royce Trans Adaption Rolls Royce Tyre Preasure Management Rolls Royce Other functions Rolls Royce

 

---

ICARSOFT BMM V3.0 OBDII FUNCTION FOR ALL CAR BRANDS

OBDII Function for all OBDII cars, not only for BMW and Mini!

Read Codes | Read generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) permanent and pending Diagnostic Trouble Codes.
Erase Codes | Erase generic and manufacturer specific Diagnostic Trouble Codes. 
Determine MIL | Turn off Check Engine Light (MIL) after clearing codes and reset monitors.
DataStream | Read live PCM DataStream. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
Freeze Frame Data | When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
I/M Readiness Test | Indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
O2 Sensor Test | This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
Evap System Test | The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
Battery test | Allows you getting the voltage of battery when the engine starts.
On-Board Monitoring | This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
Vehicle Information | Displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the vehicle. 
Comprehensive Help | Including OBD Parameter, Mode Explanations, DTC search & More.

iCarsoft BMM V3.0 OBDII Function supports most of the OBDII/EOBD test modes including CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
iCarsoft BMM V3.0 OBDII Function works on most of 2001 and later European OBDII compliant PETROL vehicles and most of 2004 and later European OBDII compliant DIESEL vehicles.

---

ICARSOFT BMM V3.0 CONTENTS