thinkcar OBD2 Diagnostic Tool,ThinkDiag 2 OBD2 Scanner Bluetooth 5.0 for iOS & Android, All System & 15+ Reset Functions, Car Diagnostic Tool with CAN-FD Protocol, AutoVIN, Active Test, ECU Coding

Turn Your Smart Device Into A Professional Technician's Diagnostic Tool

Thinkdiag2 is a portable and economical car troubleshooting tool suitable for car owners, DIYers, and repair shops. It is equipped with Bluetooth 5.0 BLE dual-mode. Compatible with Android & IOS systems. It supports Bluetooth transmission between the longest distance of 33 feet, which allows you to perform diagnostic tests without sitting in the car on hot summer days.

Thinkdiag2 professional scan tool added the CAN-FD protocol, which supports the newest (2020-2021) GM vehicles, and supports full system and full function diagnosis, its Auto-VIN function not only can quickly and accurately scan the full system for existing and potential faults but also can get a professional vehicle health diagnosis report after diagnosing. Support ECU Coding, and flash hidden functions for some VW, AUDI, BENZ, and BMW models. It can perform all the commands of mechanic needs, to find the problem whether caused by the car's electrical wiring or the car’s component.

It is also a bidirectional control OBD2 scanner, the actuation tests help us to verify system input/output without using the vehicle's controls, such as: turning on the radiator fan, adjusting the throttle, opening/closing windows, operating mirrors, injector Buz test, and turning on interior and exterior lights, sound horn, test door lock actuators, etc. Not only supporting 15 popular special functions, if entering the all-system diagnostic menu, but you will also unlock more special functions of your vehicle support, not at all inferior to any high-value (exceed 400 USD) professional diagnostic tool.

The key fob programming is a popular function for vehicle owners. To prevent the car from being used by unauthorized keys, and must be performed the anti-theft key matching function, so that the immobilizer control system of the car identifies and authorizes remote control keys to normally use the car. Notice: When the ignition switch key/combined instrument panel/ECU/BCM/ remote control battery is replaced, IMMO matching must be performed.

Repair Info provides vehicle diagnostic tutorials, flashlight functions, and a coverage list. Adopt soft rubber and ABS plastic shell, which are more wear-resistant and dustproof but also have the effect of anti-drop protection and shock absorption. The body uses a double-sided signal indicator to better identify the communication status, where the green signal indicates a diagnostic connection signal, the blue signal indicates a Bluetooth signal and the red light indicates a power signal.

Tips: 1. Internet connection is recommended when using it. Some functions may not be available or diagnostic result error without connecting network.

2. please check the car power has turned on or the obd2 interface has been well plugged in order to ensure the device can work normally.

3. Please do a firmware repair or uninstall and reinstall the software when the moble app was hanging around and not moving during the diagnose; Because it might be the software has new update or just software carked.

ThinkDiag 2 has 15+Maintenance reset function

• Oil Light Reset: This allows you to recalculate the engine oil life system after an oil change. ETS Learning: Initializes the throttle actuator to restore the "learning" values stored on the ECU to their default state.
• TPMS Reset: When the car tire pressure fault light is on, after carrying out maintenance, you need to reset the tire pressure through the tire pressure reset function to extinguish the tire pressure fault light.
• IMMO Matching: In order to prevent the car from being used with illegal keys, the anti-theft key matching function enables the immobilizer control system on the car to identify and authorize the remote control before the car can be used normally.
• Brake pad reset: When the brake pads and brake pad wear sensing line are replaced, the brake pad indicator lights up, after the brake pad sensor line short circuit is repaired, or after the servo motor is replaced, the reset needs to be done.
• SAS Calibration: Calibrate the steering angle sensor and clear the fault memory.
• Battery Reset: It is to use Thinkdiag2 to perform a reset process on the monitoring unit of the car battery, clear the original fault information about the battery being low, make it match again, and let the monitoring unit monitor with the relevant information of the existing battery as the standard.
• ABS Bleeding: When the ABS system contains air, the brake system needs to be exhausted through the ABS exhaust function to restore the ABS system braking sensitivity. The ABS bleed function is required when replacing the ABS computer, ABS pump, brake master pump, brake sub-pump, brake lines, and brake fluid.
• DPF regeneration: Specially works for diesel particulate filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after engine control unit replacement.
• Injector Coding: usually in the replacement of ECU, the injector nozzle, is required to confirm the code of each cylinder nozzle or re-code. So that the cylinder can better identify each cylinder nozzle, and more accurate control or correction of the amount of fuel injection of each cylinder.
• Sunroof initialization: This function can set the sunroof locking off, closing when it rains, memory function of sliding/tilting sunroof, outside temperature threshold, etc.
• EGR Adaption: This function can be used for self-learning after EGR (Exhaust Gas Recirculation) valve cleaning or replacement
• Suspension Matching: When replacing the body height sensor in the air suspension system, after the control module or when the car is leveled incorrectly, this function needs to be performed to adjust the body height sensor for level calibration.
• Transmission Learning: When the transmission is disassembled or repaired (after the battery is disconnected in some car models), it will lead to shift delay or shock problem, then this function needs to be performed to make the transmission compensate automatically according to the driving conditions in order to achieve a more comfortable and ideal shift quality.
• Headlight Matching:This function initialises the adaptive headlamp system.The adaptive headlamp system can decide whether to turn on the headlamps automatically according to the ambient light intensity, and monitor the vehicle's travelling speed, body posture, etc.

Note: 1. Not all 15 reset functions will vary on one car,which will depends on the vehicle is already equipped with. If not sure compatible,please send the car mode and year made for a confirm. 2. some reset functions of some vehicles like for vw,for Mercedes-Benz,which needs to enter into the model software and do it,Here is the path:Auto VIN/Manually indentify--select system--find the system you want to do reset function--find the special function.

Registration Process

Thinkdiag2 only supports 1-year full software function use and update, after 1-year, if you don't renew it, you can only use the basic OBDII full function.

To subscribe to one car brand need pay additionally,In-app payment. (after subscription, you can get full system functions and special functions of all compatible models under its brand).

Do you think it's expensive? Don't worry, you can earn points in the app by activating your device/doing tasks/check-in, etc. Points can be exchanged for rewards, but you can't convert it to cash, and points can only be used in the "Thinkdiag" app.

Notice: Points will never be cleared.

• Component Matching: Compatible with Volkswagen / SKODA / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / KIA / Subaru etc.
• Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc.
• Online Account Login Service: Compatible with Volkswagen / Audi / SKODA / Seat etc.
• Online Calibration: Compatible with Volkswagen / Audi / SKODA / Seat etc.
• Online Parameterization: Compatible with Volkswagen / Audi / SKODA / Seat etc.
• IMMO Matching/Key fob Programming: Compatible with Volkswagen / Audi / SKODA / Seat etc.
• Guided Functions: Compatible with Volkswagen / Audi / SKODA / Seat etc.
• Power Balance: Compatible with Chrysler / GM / Ford etc.
• Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc.
• SCN Coding for Benz

Supports the diagnosis of Chrysler, Dodge, Jeep, Alfa-Romeo, and Fiat after 2019, but only provides the login entrance of AutoAuth. You need to purchase a registration number from the AutoAuth official website and log in to use it.