Jansite Upgraded TPMS Tyre Pressure Monitoring System Solar Wireless 4/2 Wheel Switch Modes Accuracy 0.01 Bar 21-87Psi Tyre Pressure Monitor 6 Alarm Mode with Detached Bracket and 4 External Sensors

Jansite 2024 Upgraded High Accuracy TPMS Solar Tyre Pressure Monitoring System

• Unique Design:tpms tyre pressure monitoring system supports 2-wheel 4-wheel mode, front and rear wheels high and low pressure alarm value can be set separately and support for tyre location switching.
• High Accuracy:tpms tyre pressure value is accurate to 0.01bar, helping you get more accurate data of tire pressure and temperature to ensure safe driving.
• Easy to Read:using large 3.5-inch screen with built-in auto light sensing function allows you to see the real-time tyre pressure clearly,day or night.
• 2 Power Supply Modes:solar + usb dual charging mode ensures that the tyre pressure monitoring system continues to work and easy to drive in all weather conditions and say goodbye to the hassle of frequent charging.
• Improved Type-C Port:solve the problems of poor heat resistance,slow charging and easy deformation of the traditional mini-USB interface, the improved Type-C interface is more durable and stable,fast charging, which helps to prolong the life of the product.
• 2 Mounting Options:separate bracket included for more flexible mounting, windscreen or centre console position possible.
• Note: 1.The distance between the sensor and the system cannot be too far, the maximum distance is 5.5 meters, and disconnection may occur if it exceeds this distance. 2.Please check the sensor battery before use to ensure that the battery is not loose and has sufficient power. If the battery is replaced, it needs to be re-paired. 3.Please read the product manual carefully before use, which is more convenient for installation and use.
• Re-pairing process of some sensors:1.Remove the sensor that needs to be re-paired. Press and hold the M button for 3 seconds. 2.Enter the settings screen. Short press the left button twice and short press the M button once to switch to the pairing interface. 3.Short press the left and right buttons to select the sensor that needs to be re-paired. Short press the M button again to start pairing. The display will show the location that needs to be paired. Install the sensor at the corresponding location. The monitor automatically displays the value and switches to the next tire. 4.Press the right button to save and return to the main interface.

Unique Design - 2/4 Wheel Mode, Front and Rear Wheels Alarm Can be Set Separately

• Automatic Sleep/Vibration Monitoring Function

The TPMS is equipped with vibration detection, eliminating the need to manually switch the TPMS display on and off.

When the car is started the TPMS will automatically switch on when it senses vibration and quickly monitor and display the tyre condition. When the car is switched off, if the TPMS does not detect vibration for 5 minutes, the display will automatically go into sleep mode to conserve power and extend the life of the product. When vibration is detected again, it will turn on automatically (please do not manually turn off the display when using this function).

• Easy to Install

1. Unscrew the valve cap
2. Screw in six angle nut
3. Install the sensors on the cooresponding tires
4. Screw the 6 angle nut with wrench
5. Check if the air is leaking with soapy water