Description
Product Reviews

video

Merchant video

How to install the bike rack?

1. Clean up the car roof and the suction cups with a clean and wet towel.

2. Install front fork holders, then put the rack on the chosen location, press the suction cup vertically against the car roof with one hand while the other hand pushes the cylinder rod to extract the air until the white line is in the pump.

3. Remove the bike front wheel then lock the front fork on the roof rack.

4. Install the rear suction cup, then fix the rear wheel and the crank with hook and loop straps.

ROCKBROS Bike Carrier for 1 Bike / 2 Bikes / 3 Bikes

Bike rack for 1 bike	Bike rack for 2 bikes	Bike rack for 3 bikes
Brand ROCKBROS	Brand ROCKBROS	Brand ROCKBROS
Color Red/Black	Color Red/Black	Color Red/Black
Capacity For 1 bike	Capacity For 2 bikes	Capacity For 3 bikes
Length approx. 47 cm	Length approx. 82 cm	Length approx. 92 cm
Weight approx. 2.1kg	Weight approx. 3.4kg	Weight approx. 4.5kg

Bike rack for 1 bike

Bike rack for 2 bikes

Bike rack for 3 bikes

Brand

ROCKBROS

Brand

ROCKBROS

Brand

ROCKBROS

Color

Red/Black

Color

Red/Black

Color

Red/Black

Capacity

For 1 bike

Capacity

For 2 bikes

Capacity

For 3 bikes

Length

approx. 47 cm

Length

approx. 82 cm

Length

approx. 92 cm

Weight

approx. 2.1kg

Weight

approx. 3.4kg

Weight

approx. 4.5kg

How to choose installation location?

The selected installation location must be flat and smooth. Do not install it on the advertising area or other seam.
Please hold the handlebar forward when attaching the bike to the roof rack.
When installing, the white plunger need to be pointed towards the back of your car.
After installing the roof rack, you can take some videos and photos in 360 degrees to enjoy a better after-sales consultation.

a bike rack with a bicycle wheel attached to it

Precautions when using ROCKBROS Suction Bike Rack:

1. The maximum load of one-bike rack is 20KG. The load-bearing capacity of the second-bike rack and third-bike rack is more than 20KG, but please consider the bearing capacity of your own car.
2. When used on sunroof or glass roof, pls DO NOT open the car sunroof when the rack is installed, and also it is necessary to confirm there are no cracks or small holes on the sunroof before installation.
3. Do not use the bike rack on the convertible top and roadster top car.
4. Before using, please check all the bolts are tightened.
5. Wipe the suction cup and car roof surface with a clean wet towel, prevent the roof rack from sliding due to accumulated water.
6. Make sure there is NO obvious sign of rebound from the cylinder rod.
7. Speed should be less than 120 Km/h when using the bike rack, and please check whether the bike rack still works normally every 2 hours.
8. After using, please cover up the suction cups.
9. There is a video of how to install the front fork on the bike rack in Figure 7, pls watch it carefully to confirm that your bike fronf fork is installed correctly.
10. On normal mountain roads, you need to slow down to reduce speed when turning or going over speed bumps.

When do you need the adapters?

ROCKBROS bike carriers are suitable for bike fork widths under 110mm. You can easily install the bike with quick release, but for the thru-axle bike, you need to buy an adapter separately.
What size for the adapers do we have?

12mm*100mm, 15mm*100mm, 15mm*110mm, 20mm*110mm, total 4 sizes.
What is included in the package?

Bike carrier+Rear wheel suctions+Hook and loop strap for the crank+Standard accessories come with a quick release(4.4mm*100mm)and adapters (5mm*100mm).
What can you do if the suction cup could not work normally(the white line is always visible)?

Please notify us, we will resend you the new replacement suction cups at once!

Choose the adapters for your roof rack.

	12MM*100 Buying Options	15MM*100 Buying Options	15MM*110 Buying Options	20MM*110 Buying Options
Customer Reviews	303	303	303	303
Price	£8.49	£8.49	£9.34	£9.34
Brand	ROCKBROS	ROCKBROS	ROCKBROS	ROCKBROS
Color	Black	Black	Black	Black
Size	12MM*100	15MM*100	15MM*110	20MM*110
Material	Rubber	Rubber	Rubber	Rubber
Model	TZPJ	TZPJ	TZPJ	TZPJ

【EASY INSTALLATION】With quick release fastener and synthetic rubber sucker, it is easy to fix your bikes on the car roof. The weight of our bike rack is between 2.1-4.5kg, it is portable to carry and install. And there is a installation video in the Picture 7, please follow the instructions or the installation video.
【NOT DAMAGE YOUR CAR】Synthetic rubber suckers are sucked on the car roof, will not damage to the paint and sheet metal of your car, and the maximum load capacity of each bike on the car bike rack is 20kg. This bike carrier for car make travelling with your bikes come true.
【STABILITY&SECURITY】The aluminum alloy body is sturdy enough to hold your bike. Vacuum pumping suction cups ensure firmness of the rack. And the crank is fixed with high-intensity hook and loop fasteners, which could prevent pedals from attriting roof of cars.
【COMPATIBILITY】Roof top bike rack for one, two and three bikes, are suitable for most bicycles, and could be used for all almost vehicles like sedans, coupes, hatchbacks, SUV, vans, and more. Meets your need to transport your bikes during road trips or camping excursions.
【LOW WIND-RESISTANCE】Cabinet and delicate rack shape could controll wind resistance, and also greatly lower the noise, let your driving environment be more comfortable. ☆☆PLEASE NOTE: This sucker bike rack is quality guaranteed, we provide after-sale warranty. If you have any questions or suggestions, please feel free to notify us, we are fully at your service.

› See more product details