32x32mm GoPro mounting holes in top plate with installed press-nuts
Designed for up to 5.1 inch props, no props in view
Recommended 1000-1300mAh 6S battery
~350g without battery
Captive battery straps
220mm wheelbase
6 mm Arms
From Chris Rosser at AOS
When I set out to create a bind and fly version of the AOS 5 V2 I had a vision to combine the latest and greatest technology into the ultimate FPV freestyle machine. This is the result. - Chris Rosser, AOS RC
Frame: The AOS 5 V2 has been designed to deliver the ultimate freestyle flight experience. The unique arm geometry has been refined through topology optimization to deliver maximum strength and stiffness for minimum weight. The same technology is used to optimize aircraft, satellites and race cars.
Motors: Exhilarating speed, silky smooth flight after flight. iFlight's XING2 2207 motors provide power and durability with a 7075 Aluminium unibell design, 5mm titanium shaft, Japanese NSK bearings, N52H center slotted arc magnets, and an integrated o-ring for bearing protection.
Electronics: Blazing fast with less filter delay for a more locked-in flight feel. The F7 flight controller takes maximum advantage of the vibration performance of the frame with a custom filter tune to reduce latency and improve propwash handling. With OSR4 mode enabled in BF4.3 the BMI270 gyro delivers latency and noise performance that matches or exceeds that of the MPU6000. A BLHeli32 ESC smoothly delivers power to the motors and the massive 55A rating ensures the motors will have all the power they could ever need.
Electronics
FC // BLITZ MINI F7
Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Motor outputs: 4x (SH1.0 connector)
Flash: 16MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 30.5x27 mm
MCU: STM32 F722
Barometer: DPS310
OSD Chip: AT7456
LED controller: Yes
Beeper pad: Yes
Gyro: BMI270
Weight: 5g
UARTS: 6
ESC // BLITZ Mini 55A
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Mounting Holes: 20*20mm/Φ4mm
Target: IFLIGHT_BLITZ_G2
Supports 2-6S lipo input
Dimension: 35*42mm
Current sensor: Yes
Firmware: BLHeli 32
Constant: 55 Amps
Current rate: 100
BlackBox: 16MB
Burst: 60 Amps
Weight: 11.3g
MCU:G071
BEC: NO
AOS 5 V2 HD Included Components and Parts
4 x Nazgul F5 - CW propeller + 4 x Nazgul F5 CCW (Grey)